background image

Quick Reference Guide

sbRIO-9629

Kit Contents

Screwdriver

IDC to

DSUB Cable

Thermal

Kit

Standoffs

and Screws

Documentation

Driver Media

USB Cable

50-Pin IDC Cable

Power Supply

sbRIO-9629

RMC Breakout

Board

IDC Breakout Board

©

 2019 National Instruments  

All rights reserved. 

Information is subject to change without notice. Refer to the 

NI Trademarks and Logo Guidelines

 at 

ni.com/trademarks

 for more information on NI trademarks. 

Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/

technology, refer to the appropriate location: 

Help»Patents

 in your software, the 

patents.txt

 file on your media, or the 

National Instruments Patents Notice

 at  

ni.com/patents

. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer 

to the 

Export Compliance Information

 at 

ni.com/legal/export-compliance

 for the NI global trade compliance policy and how to obtain relevant HTS codes, 

ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN 

AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject 

to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.

For a complete list of resources go to the following URL: 

ni.com/r/sbrio

377898A-03 Nov19

Connect to the Host Computer via Ethernet

1. Power on the host computer.
2. Connect the sbRIO-9629 to the host computer using a standard Category 5  
    (CAT-5) or better shielded, twisted-pair Ethernet cable.

Connect to Power

1. Ensure that your power supply is powered off.
2. Insert the power connector plug into the power connector receptacle of 
    the sbRIO-9629 until the connector latches into place.
3. Turn on the power supply.

Connect to the Host Computer via USB

1. Power on the host computer.
2. Connect the USB Type-C 2.0 device port of the sbRIO-9629 to the  
    host computer using a Type-C to Type-A USB cable.

OR

Reviews: