![background image](http://html1.mh-extra.com/html/magnetek/hpv-900-series-2/hpv-900-series-2_technical-manual_3606659172.webp)
Troubleshooting
150
Name
Description
Possible Causes & Corrective Action
Z MARKER
LOST
[F62]
This fault is declared when the drive
expects to see a signal from the Z
channel of the encoder within a
window but it doesn’t during an Open-
Loop Alignment.
Phasing Problem
– Incremental PM
Swap two encoder leads (e.g. A and
–A)
to establish proper phasing or swap two
motor leads (e.g. U and V)
Encoder Problem
Check encoder coupling: align or replace
Check encoder wiring
Encoder failure (replace encoder and
REALIGN the rotor)
Option board failure (replace option
board).
Z-pulse channel not working correctly