SW4000 USER’S MANUAL
VER5.13 67
4. Press
ENTER
to confirm your setup and exit “ANGLE.MODE”
setup.
Press
AC
to cancel your change and exit “ANGL.MODE”
setup;
7.21
Angle display type
There are two angle display types for SW4000.
TYPE 0: indicate angle display is DD.
TYPE 1: indicate angle display is DMS.
Default value: TYPE 0
。
Set the angle display type as DMS.
Steps:
1
：
First enter
“
SETUP
”
, press
or
until
the message window display
“
ANGE.TYPE”.
2
：
Press
ENTER
，
Y window display the former setup.
Z window display the former angle mode is DD
。
3
：
Set the angle display mode as MODE1.
Press
1
，
Y window display the changed mode,
Z window display current mode is DMS
4
：
Press
ENTER
，
the new setup has been saved and exit this setup.
Press
AC
exit this setup and the setup unsaved.
7.22
Load default setup
Function: Clear all data except the linear compensation and DRO type. DRO will load default setup for all
parameters. After loading default setup, user must search RI once to enable resuming ABS
