SW4000 USER’S MANUAL
VER5.13 51
Chapter 7 INITIAL SYSTEM SETTINGS
Function:
Set various parameters according to actual operation.
Parameter Items:
SEL SYS Setting the number of linear scale
DIRECT Setting positive direction for counter
LIN COMP Setting linear compensation
R OR D Radius/Diameter Mode
Z DIAL Setting Z axis Dial
RESOLUTE Setting the resolution of scale
RELAY.MOD Setting relay mode
EDM MODE Setting EDM mode
SDM DIR Setting the input mode of SDM
ERROR Enable / Disable error message display
SHRINK Setting shrinkage ratio
DEEP.COMP Enable/Disable the electrode compensation
SLOP.MODE Setting the slope machining mode
LATH.MODE Setting the lathe mode
RI MODE Setting RI mode
AUTO. SCH Detecting the edge automatically or not
AXIS.TYPE Setting the type of axis
STEP.MODE Select the step mode in ARC processing
ANGE.MODE Select the angle display mode
ANGE.TYPE Select the angle display type
ALL CLS Clearing all customer setting and return default setting
NOTE: what you have changed (except “ALL.CLS”) would not been saved if you quit “SETUP” (initial system
settings) without selecting “EXIT” item.
7.1
Enter/Exit Initial System Settings
Press
ENTER
to enter initial system setting after DRO
powers on in 1 second: then “SETUP” displays in message window.
Press
or
to select the item you want to change.
If you want to quit initial settings: press
or
until
“EXIT” appears in message window and press
ENTER
.
