SW4000 USER’S MANUAL
48 VER5.13
RELAY MODE = 0,
EDM COMP = 0;
2. Set EDM.DEEP 10mm; EDM.HOME 3mm;
3. Set the point O as datum for user coordinate system;
4. Press
to enter BHL function and set parameters:
LINE.DIS=150mm; LINE.ANG=30
HOLE.NUM=6
5. After all parameter setting, the message window will display “HOLE 1”. Move the machine
table until “0.000” displays in X, Y window; it is the position of centre of the first hole. And then
press
to enter EDM function to process hole 1. After hole 1 is machined, DRO returns
BHC.
6. Press hole 2;
Press
and the message window will display “HOLE 2”. Move the machine table until
“0.000”displays in X, Y window; it is the position of centre of the second hole. And then press
to enter EDM function to process hole 2. After hole 2 is machined, DRO returns BHL.
7. Process other holes in the same way.
Press
to return normal display state when all holes are machined.
