SW4000 USER’S MANUAL
VER5.13 33
In slope processing, operator can press
(three axes) or
X
Y
(two axes) to exit, return to
normal display, making use of this you can confirm position of DRO. And then press
(three
axes) or
X
Y
(two axes) return to slope processing.
4.5
Auto Edge Detection
Function:
Searching border automatically;
Measuring dimension of work-piece;
Searching for the center of work-piece.
NOTE: This is an additional function. It needs additional pay.
Example:
Radius of EDGE DETECTOR 5 mm
Work-piece dimension on X axis 65 mm
Measure by using the linear scale installed at X axis.
STEPS:
1. Set display unit to metric.
2. Press
(three axes display) or
X
Y
(two axes display)
to enter AUTO EDGE DETECTION.
Message window displays “SEL AXIS”;
Y window displays the radius of the edge detector; the sign of
the value displayed is the sign when the detector touches the
first edge.
3. Input the radius and sign of the detector.
Press
5
+-
ENTER
in turn, and then the Y window
displays “-5.000”.
NOTE: You can skip this step if the diameter is set well.
4. Select axis, take X axis for example.
Press
X
to select X axis.
“0.000” flashes in X window, waiting for detecting edge.
Y window, Z window display the value of the current
position.
Press
Y
to select Y axis; press
Z
to select Z axis
in the same way.
