SW4000 USER’S MANUAL
VER5.13 17
direction. It is called lathe function.
A. lathe mode 0: normal display (the lathe
function is disabled).
B. lathe mode 1: X window value = the value of X axis po the value of Y axis position.
C. lathe mode 2: X window value = the value of X axis po the value of Z axis position.
STEPS:
1. Set the lathe mode in initial system settings;
2. In normal display state press
(three axes display) or
Y
X
+
(two axes display) to enter lathe
function. Then the LED of the lathe function will be on (If the lathe mode is 0, the lathe function is
disabled and the LED is off);
3. In lathe state, press
(three axes display) or
Y
X
+
(two axes display) to exit the lathe function:
and the LED turns off.
A. If in normal display state: the value of the position is as the
right.
B. In lathe mode 1, the DRO will display as the following:
X window display value = value of X axis po
value of Y axis position
C. In lathe mode 2, the DRO will display as the
following:
X window display value = value of X axis po
value of Z axis position
2.12
Filter display value
When machine a work-piece by grinder, the display value varies quickly due to the vibration of
grinder. User can’t see display value clearly. SW4000 series DRO provides display value filter function to
disable the quake change of display value.
STEP:
1)
Enter display value filter function.
In normal display state, press
N
O
-1
and
ENTER
simultaneously, enter display value filter function.
2)
Exit display value filter function.
Press
N
O
-1
, exit display value filter function.
