SW4000 USER’S MANUAL
54 VER5.13
1. Enter “SETUP”, then press
or
until message
window displays “LIN COMP”.
2. Press
ENTER
,
X window, Y window, Z window displays the former
linear error compensation coefficient separately.
Message window displays “SEL AXIS” which indicates
that the next step is to select axis.
3. Select axis
Press
X
to select X axis.
Note: Press
X
to select X axis. Data in X window flashes which
indicating that you can input the linear error compensation
for X axis;
Press
Y
to select Y axis. Data in Y window flashes which
indicating that you can input the linear error compensation
for Y axis;
Press
Z
to select Z axis. Data in Z window flashes which
indicating that you can input the linear error compensation
for Z axis;
Message window displays “ENTR.PPM”, indicating it
is waiting for a data to be inputted.
4. Press
1
0
0
ENTER
in turn;
If incorrect number is input, press
AC
to cancel and
input again.
5. Input the error compensation coefficient for Y axis;
Press
Y
5
0
ENTER
in turn;
Input the error compensation coefficient for Z axis;
Press
Z
1
0
0
+-
ENTER
in turn.
6. Press
ENTER
to confirm your setting and exit linear error
compensation setup.
