SW4000 USER’S MANUAL
30 VER5.13
Example 3:
Process the ARC DE as the figure from point D to point
E. Parameters are as the following:
Machine plane: XZ
TYPE: 6
RADIUS: Actual radius of the arc
TOOL DIA: Actual value (actual tool)
MAX CUT: preset as the costumer
Example 4:
Process the ARC DE as the figure from point D to point E.
Parameters are as the following:
Machine plane: YZ
TYPE: 7
RADIUS: Actual radius of the arc
TOOL DIA: Actual value (actual tool)
MAX CUT: preset as the costumer
Note: For SW4000-2, it is not installed with Z-axis, please press
or
to simulate position
of Z-axis,
simulate moving to the former process point, and
simulate moving to
the next process point.
Steps:
1: set “STEP MODE” as “Z STEP” in setup mode, and set Z-axis dial (default value is
2.5mm);
2: Before machining, at first, align lathe with the beginning point Z of R, zero Z axis;
3: In machining process, message window displays simulate height of Z axis, which indicates
simulate height of Z axis while machining;
As right figure, while machining XZ plane, X
window display position of X axis, X axis is
finished when displaying “0.000” in X window;
In Y window, the former 2 number indicates number of dial, and the following 5 number
indicates scale number of dial, which means that machining to this scale for current
point.
While machining YZ plane, Y window display position of Y axis, and when this window
displays “0.000”, which indicates the machining is finished in Y direction; In X window,
the former 2 number indicates number of dial, and the following 5 number indicates
scale number of dial, which means that machining to this scale for current point.
4.4
Slope Processing
This function is only for SW4000-2, SW4000-3.
Function: This function can calculate the position of every
processing point automatically in processing slope. Only the following parameters need to be inputted:
Z
S
T
E
P
M
A
X
C U
T
A
D
O
E
D
O
E
