SW4000 USER’S MANUAL
34 VER5.13
5. Move the EDGE DETECTOR to touch the first edge,
then the X window will display the position of the
detector with “-5.000”. The displayed value in X
window is the measure value. You can touch the edge
many times.
6. Move the EDGE DETECTOR to touch another edge.
The X window will show the length of the work-piece
with “65.000”;
7. Press
1
2
to exit this function. Move the EDGE DETECTOR until the X window displays
“0.000”, which means that this position is the center of the work-piece at the X axis direction.
NOTE: 1. Pressing
(three axes display) or
X
Y
(two axes display) will exit this function when in EDGE
DETECTION function.
2. If you detect edge only, you needn’t do step 6 and 7.
3. If do not find the center point, you needn’t do step 7.
格
格
格
格式化
式化
式化
式化:::: 項目符號及編號
