SW4000 USER’S MANUAL
VER5.13 63
7.15
Setting Lathe Mode
Lathe mode 0: Disable lathe function;
Lathe mode 1: X window display value = the position of X axis + the position of Y axis;
Lathe mode 2: X window display value = the position of X axis + the position of Z axis;
Default mode: disable lathe mode.
Set the lathe as mode 1.
STEPS:
1. Enter “SETUP” and press
or
until the message
window displays “LATH.MODE”;
2. Press
ENTER
,
then the Y window displays the former lathe mode;
3. Set the new lathe mode;
Press
1
.
Note: press
2
or
1
or
0
to change the lathe mode.
4. Press
ENTER
to confirm your change and exit “LATHMODE”.
7.16
Setting RI MODE
SW4000 provides 8 RI modes: mode 1 to mode 8, every mode has its corresponding wave of A, B and
RI.
Default mode: MODE 1
Set RI MODE 5 for X axis .
STEPS:
1. Enter “SETUP”, then press
or
until the message
window displays “RI MODE”;
2. Press
ENTER
:
X window, Y window and Z window displays the former
RI mode respectively, message window displays “SEL
AXIS” which indicating the next step is to select axis;
