SW4000 USER’S MANUAL
VER5.13 49
Chapter 6 CALCULATOR FUNCTION
SW4000 provides arithmetic operation such as plus, minus, multiply and divide, which convenient for
operator to processing work piece according to the drawing.
6.1
Enter and exit Calculator Function
In normal display state: press
to enter calculator function
In calculator state: press
to exit calculator function
6.2
Calculating Example
Example 1: 123 + 76 × 58 - 892 / 63
1
2
3
+
7
6
5
8
-
8
9
2
.
.
6
3
Example 2: 358 + 456 × sin
-1
(-0.5)
3
5
8
+
4
5
6
0
.
5
+-
N
O
-1
-1
sin
Note:
1 If incorrect data is inputted, press
AC
to cancel and input again.
2 Error would occur when calculating incorrectly, such as “0” is used as divisor or proceeding
arcsine when absolute value is more than 1. In this case, the message window will display
“ERR…” You can cancel this error message by pressing
AC
and input data again.
3 The absolute value of inputted data and calculated result should be in the range of 0.000001 to
9999999, otherwise it can’t be displayed.
6.3
Transferring the Calculated Results to Selected Axis
After calculating is finished, user can
press
to transfer the calculated result to X axis, then the X window will display this value;
Press
to transfer the calculated result to Y axis, then the Y window will display this value;
Press
to transfer the calculated result to Z axis, then the Z window will display this value.
