LS ELECTRIC XGT Series User Manual Download Page 711

Page: 711 / 804

Chapter 17. ST Edit

17-4

17.2 Limitation

Following limitations are applied to ST program edit.

Item

Description

Limit

Max. number of characters

in a line

Max. number of characters in a line is 2,048 English alphabets

or 1,024 Korean alphabets.

2,048

Note

1. Only one kind of language can be used in a scan program.

2. Scan program language and transition and action of SFC language may differ from each other.

3. A program made with a language cannot be converted to another language.

17.3 Program Edit

17.3.1 Shortcut Key

For ST programming and edit, input, copy, cut or paste can be performed using keyboard.

Following shortcut keys can be changed with the menu [Tools]-[Shortcut Key Setting].

Function

Shortcut Key

Description

Copy

Ctrl + C

Copy the selected character string.

Paste

Ctrl + V

Paste the selected character string.

Delete

Del

Delete the selected character string.

Cut

Ctrl + X

Copy and delete the selected character string.

Cancel

Ctrl + Z

Return to the previous status.

Redo

Ctrl + Y

Return from the state of before change to the

previous edit state.

Select All

Ctrl + A

Select the entire character string.

Summary of Contents for XGT Series





































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for XGT Series

Reviews:

LS ELECTRIC XGT Series, User Manual, Page: 711 / 804

Search results

Summary of Contents for XGT Series

Reviews: