LS ELECTRIC XGT Series, User Manual, Page: 406 / 804

Chapter 10. Online
10-11
- Normal connection
3) Ethernet

Check if Ethernet cable (LAN cable) connection between Computer and PLC is correct.

Check if the IP and Gateway of Ethernet module is correct. The IP and Gateway of Ethernet
module can be read or written with XG-PD software, which can be executed when [Tools]-
[Network Manager] on the XG5000 menu bar is clicked.

Check if the Ethernet module responds correctly, if the IP and Gateway of Ethernet module is
correct.
a) Click “Execute” which can be seen when Start button of Windows is clicked.
b) Input “command” in the Execute dialog box.
c) Execute ping test for Ethernet module in the Command Prompt. Type “ping IP address”
and press ‘Enter’ key. If the Ethernet module responds normally, the screen will show the