LS ELECTRIC XGT Series, User Manual, Page: 330 / 804

Chapter 8. Find / Replace
8-3
searches for word device M0000 including bit device M0000A and bit device M0000A.)
③
When [Word] is selected, only the word device can be entered in the search contents, and only
the word device is searched in the selected search area.
④
When [Word (Bit + Word)] is selected, only the word device can be input to the search contents,
and the search is performed for all the bit devices belonging to the word device and word in the
selected search area. (For example, if a word device M0000 is input in the search result, the
device to be searched searches from the bit device M00000 belonging to the word device
M0000 and the word device M0000 to the device M0000F.)
⑤
If [All] is selected, device search is performed in the bit (type of word) type when the bit device is
input in the search contents, and word device is input in the search content. Perform device
discovery. In the case of word and bit device, the device is searched in the form of bit (word
including bit) and word (Bit + Word). (For example, if an M1 device is input in the form of a word
and a bit device in the search result, the device to be searched also searches for the word
device M0000 including the bit device M00001 and the bit device M00001 as in the bit (word
including bit) Performs search from bit device M00010 to M0001F device belonging to word
device M0001 and word device M0001 as word (Bit + Word).)
d. Output to Find 2: The XG5000 has two search result windows. By default, the Find 1 Results pane will
be displayed in the Results pane, but if you select this check box, the results will be displayed in the
Find 2 Results pane.
e. direction: In each editor, specify whether to search above or below the currently selected line.
f. Range: After specifying each direction, select to search only by specifying specific lines. If you select
Specify range, you must enter the start line and the last line.
g. Find next: Look for the above setting just after the currently selected line (position). When the
corresponding device is found, the place where the device is located is selected.
h. Find all: It searches all of the above settings and displays the result in the search result window.
i. Advanced: Use this function when you want to search only for specific contacts, specific coils,
extended functions, and function / function blocks used in the ladder editor.
Note
-
The results are displayed in the Find window only when you have searched all.
-
Find All is found in the document, so choosing a direction is meaningless.