LS ELECTRIC XGT Series User Manual Download Page 217

Page: 217 / 804

Chapter 4. Variable/Comment

4-46

[Description of dialog box]

a. Variable Kind: VAR, VAR_EXTERNAL can be here

If you set this item as VAR_EXTERNAL, type, device, latch, used, comment column is not activated

b. Variable: duplicated variable name is not allowed.

Number can’t used as the first character.

Special character can’t be used. (But,‘_’ can be used.)

Empty space can’t be used.

- Same name with device is not allowed (example: M4, P4, R9....)

In case all item in line are empty, if you input variable, type will be the BIT, default value

c.Type: total 22 types are available.

- Basic type (22): (BIT, NIBBLE, BYTE, WORD, DWORD, LWORD, SINT, INT, DINT, LINT, USINT, UINT,

UDINT, ULINT, REAL, LREAL, STRING, TIMER0_1, TIMER1, TIMER10,

TIMER100, COUNTER)

d. Device: inputs device. If you don’t input device, automatically allocated area is displayed.

N/A[AUTO]: When device is not allocated automatically

- Device[AUTO]: When device is allocated automatically (Example, D0000.0[AUTO])

e. Latch: For automatic variable, sets non-latch, latch1, latch2

When allocating device, latch column is not activated

You can edit latch area at device area setting window of basic parameter

f. Used: displays whether it is used or not in program.

g. Comment: all kind of characters are allowed.

Use Ctrl + Enter for multi-line input

h. Effectiveness of line: Variable kind, variable, type are necessary for registering at global variable window

When line is not complete, that line is displayed as pink color

4.4.5 Adding EXTERNAL variable

You can brings list made in Global Variable by adding EXTERNAL variable

[Steps]

1. Select [Edit]-[Add EXTERNAL variable]

2. Dialog box for selecting global variable shows.

3. If you input variable you want to find in Find Variable, then searches automatically.

4. If you select Global Variable Item, you can sort the global variable according to All, general variable,

special module related value.

5. Check the Application column for adding and click OK

Summary of Contents for XGT Series





































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for XGT Series

Reviews:

LS ELECTRIC XGT Series, User Manual, Page: 217 / 804

Search results

Summary of Contents for XGT Series

Reviews: