LS ELECTRIC XGT Series, User Manual, Page: 356 / 804

Chapter 8. Find / Replace
8-29
[Dialog Box]
[Description of dialog box]
a. Find what: Specify the Text you are looking for.
b. Replace: Specifies the Text to replace.
c. Look in: Specify the area you are looking for. The current window is only able to find the Text in the
active window. Multiple windows can be used to find Text in a project. If you select multiple windows,
[Advanced] Button is activated, select an item to search for a Text in the project window.
d. Match whole word only: If you check Exactly matches, only matches Text that exactly match the Text
specified in Find. If you do not check it, you will also find the Text that contains the find.
e. Case sensitive: If you check case-sensitivity, only the case-sensitive Text is searched. If unchecked, it
searches without case sensitivity.
f. Include variable (Replace all): If you check this part, when replacing, the Text including the variable is
replaced. If it is not checked, replace it without including variable.
g. Output to Find 2: The XG5000 has two search result windows. By default, the Find 1 Results pane
displays the Find All and Replace All results, but if you select this check box, the results are displayed
in the Find 2 Results pane.
h. direction: In each editor, specify whether to search before or after the currently selected line.
i. Range: If you select Range, you can perform Text replacement only within a specific line. If you select
Specify range, you must enter the start line and the last line.
j. Find next: Look for the above setting just after the currently selected line (position). If a matching Text
is found, the cell moves to where the Text is located.
k. Find all: It searches all the contents to be set and displays the result in the search result window.
l. Replace: Find and replace the above settings.
m. Replace all: Find the contents set above and replace all.
a
b
c
d
e
f
g
j
k
l
m
n
h i