LS ELECTRIC XGT Series, User Manual, Page: 113 / 804

Chapter 3. Project
3-22
3.3.3 Confirm converted file
The conversion result is displayed on the result window as shown below along with the step number in the
original project file and the step number in the converted XG5000 file for the user to double-click the mouse
on the list of the result window to go to the applicable location.
1)
Classification Based on the Output Messages
Changed
Information
Change instruction name The instruction name is changed even with the identical function.
Flag address changed The flag name is changed even with the identical function.
Error
Error Information included in
KGLWIN file. {ERR.}
Error information is included in the original file.
Instruction unavailable in
XG5000
Once used in KGLWIN but deleted from XG5000. Displayed as ERR
instruction in LD.
2)
Log File Messages of Changed Information
Information on Project Change leaves its log of the String file (extension: txt) name identical to the newly
created project. At this moment, the following messages will be displayed.
Messages Description
Instruction Name Changed The instruction name is changed even with the identical function.
Flag address changed The flag name is changed even with the identical function.
Instruction Properties Changed:
Operand to String
The operand of the diverge instructions JME, JMP, CALL, etc. changed from
positive integer to string
Instruction Properties Changed:
Display format
The display of the instructions CTD, CTUD, SR, etc. by 2~4 lines block
changed to 1 line block association.
Instruction Properties Changed:
Number of operands, default applied
Due to extended function such as ROR and ROL, the number of operands
increased or deceases.
Instruction Properties Changed:
Operand to Single Bit
Applicable to BLD, BSET, etc. among application instructions, basic
instructions changed due to basic instructions extended.
Error Information in KGLWIN File Error information is included in the KGLWIN project file.