LS ELECTRIC XGT Series, User Manual, Page: 655 / 804

Chapter 15. XG-SIM
15-20
Base Slot Module Module type
Basic base 0 XGI-D21A DC 24V 8 point input module
Basic base 1 XGF-AV8A Voltage type A/D conversion module(8 ch)
Basic base 2 XGF-HO2A
Open collector type high speed counter module(2
ch)
After XG-SIM is executed, system monitor shows the module set in I/O parameter as presented in the figure.
Notes
-
For details of I/O parameter editing and the parameter setting by modules, refer to XG5000
Manual.
-
To apply the details of I/O parameter set in XG5000, it is necessary to download I/O parameter
to XG-SIM again. If the type of a selected module is changed, XG-SIM should be executed
again.
2) Digital I/O Module
Digital I/O module simulation may change the current value of contact or simulate whether the output used
as the output in the program is normally outputted. It may be different as follows, depending on the I/O
module setting in I/O parameter.