LS ELECTRIC XGT Series, User Manual, Page: 53 / 804

Chapter 2. Basic Application
2-6
Instruction Description
Connect/Disconnect Connects or disconnects with PLC.
Connect Settings Specifies the connection method.
Change Mode Run
Changes PLC mode.
Stop
Debug
Read Reads parameter/program/comment from PLC.
Write Writes parameter/program/comment on PLC.
Compare with PLC Compares the project to the project saved in PLC
Set Flash Memory Shows the window for setting up the flash memory.
Communication
Module Setting
Enable Link Sets up Link-Enable of the high-speed link and P2P.
Upload/download(File) Downloads or uploads the OS or BBM file of modules.
EIP tag Download Downloads the EIP tag list to the EIP module.
EIP tag Upload Uploads the EIP tag list to the EIP module.
Config.
Upload(Dnet,Pnet)
Uploads the configuration information of Dnet and Pnet.
system diagnosis Displays the system diagnosis window.
Reset/Clear
Reset PLC Resets the PLC.
Reset individual
module
Resets the communication module individually.
Clear PLC Deletes the parameters/programs/comments from the PLC.
Clear all PLC Deletes all programs, passwords, data from the PLC.
SD memory Formats the SD memory card.
Delete parameter Deletes parameters of the communication module.
Diagnosis
PLC information Shows up the PLC information window.
PLC history Shows up the PLC history window.
PLC errors/warnings Shows up the PLC error history/warning window.
I/O Information Shows up the I/O information window.
Save PLC history Saves the PLC’s history.
Force I/O Displays the window for compulsory I/O setting.
I/O Skip Displays the window for I/O skip setting.
Fault Mask Displays the window for fault mask setting.
Module Changing Wizard Displays the dialog window to change modules.
Start Online Editing Starts modification during run.
Write Modified Program Writes the program and information modified during run on
PLC
End Online Editing Ends modification during run.