LS ELECTRIC XGT Series, User Manual, Page: 602 / 804

Chapter 11. Communication and Special Function Blocks
11-115
Note
When Cell Copy is not executed, [Cell Paste] is not activated
Cell Paste function is supported at same data type
When pasting different data type, warning window occurs
When selecting more than one cell, Cell Copy/Paste is not possible
3) Setting Copy
It is used to copy entire detail setting of PID monitor
[Sequence]
Select detail setting window grid to copy and select [Setting Copy] by right button of mouse.
If you execute Setting Copy, all setting area is selected.
4) Setting Paste
It is used to paste all detail setting of PID monitor
[Sequence]
Select detail setting window grid to copy and select [Setting Copy] by pushing right button of mouse.
Select detail setting window grid to copy and select [Setting Paste] by pushing right button of mouse.
Note
When you select cell more than one, you can’t execute Setting Copy/Paste
5) Initialize setting
It is used to initialize entire detail setting value of activated PID monitor. You can’t use this during monitoring
[Sequence]
Push [Initialize] at activated loop or select [Initialize setting] on detail setting grid by pushing right button of
mouse
Note
You can’t execute [Cell Paste], [Setting Paste], [Initialize Setting] during monitoring