Lingenfelter NCC-001, Installation And Operating Instructions Manual

Page: 116 / 171

Lingenfelter NCC-001 Nitrous Control Center Installation and Operating Instructions 115
Access from the Computer Program:
From the Status screen , select the relay by pressing either the "Relay1" button or the "Relay2" button. The
"Nitrous2 Percent Enable" option is located in the "Relay Control Options" dialog box. Check the box to enable
the Nitrous2 Percentage Control Option or un-check the box to disable the option.
Fuel2 Percentage Control Option
If this option is enabled, the selected Relay output is controlled by Fuel2 duty cycle and any other control options
that are enabled.
Access from the Controller:
From the Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the desired
Relay Menu is highlighted and then press the “ENTER” button. Press the "ENTER" button to select the "Fuel2%
Control" option, then the “YES” or “NO” button to change the current selection. If the “NO” button is pressed no
change will be made.
Access from the Computer Program:
From the Status screen , select the relay by pressing either the "Relay1" button or the "Relay2" button. The
"Fuel2 Percent Enable" option is located in the "Relay Control Options" dialog box. Check the box to enable the
Fuel2 Percentage Control Option or un-check the box to disable the option.