Lingenfelter NCC-001, Installation And Operating Instructions Manual

Page: 145 / 171

User Program Files, Data Logs, and Other Software Options 144
From the Status screen , click on the "Load User Program from Controller" button in the toolbar on the upper left-
hand side of the window, as shown below.
Once the "Load User Program from Controller" button has been pressed, a status window will appear showing the
status of the upload, as shown in the illustration below. Once the status window disappears, the upload of the
user program is complete it becomes your current user program on the computer software.
NOTE: Since the
uploaded user program becomes the current program, you will be prompted to save any changes to the current
program.
Save User Program to Controller
This option allows the user to flash the current user program file, as well as any other saved user program to the
controller.
Warning: The memory on the controller is only capable of holding one program at a time. This program contains
3 different sets of user defined settings. All other user programs must be backed up by using the Nitrous Control