Lingenfelter NCC-001, Installation And Operating Instructions Manual

Page: 79 / 171

Nitrous Menus: Nitrous1 (N2O-1) and Nitrous2 (N2O-2) 78
Access from the Computer Program:
From the Status screen , select the stage by pressing either the "Nitrous1" button or the "Nitrous2" button. The
"Nitrous Off RPM" setting is found in the "Nitrous Control RPM" dialog box under the "Options" Tab. Click the
"UP" and "DOWN" arrow buttons or type in any numeric value in the valid ranges shown above.
See Appendix B: Nitrous & Fuel Operation for more information.
6.7 RPM Hysteresis Value / Hysteresis Percentage
This setting allows the user to specify the hysteresis percentage for the maximum and minimum (ON/OFF) RPM
nitrous settings. For the minimum (ON) RPM setting, this is the percentage below the set RPM point that will
disable nitrous. For the maximum (OFF) RPM setting, this is the percentage below the set RPM point that re-
enables the nitrous.
Refer to Appendix D: Glossary of Terms for an explanation of how a hysteresis works.
Access from the Controller:
From the Main screen , select the stage by pressing either the "N2O_1” button or the "N2O-2" button. Press the
“DOWN” arrow button repeatedly until the "RPM Hysteresis %" setting is highlighted and then press the “ENTER”
button. Using the “LEFT” and ”RIGHT” arrow buttons adjust the setting. Press the “SAVE” button to accept the
new setting or press the “ESC” button to exit with no change.
Access from the Computer Program:
From the Status screen , select the stage by pressing either the "Nitrous1" button or the "Nitrous2" button. The
"Hysteresis %" setting is found in the "Nitrous Control RPM" dialog box under the "Options" Tab. Click the "UP"
and "DOWN" arrow buttons or type in any numeric value in the valid ranges shown above.