Lingenfelter NCC-001, Installation And Operating Instructions Manual

Page: 122 / 171

Lingenfelter NCC-001 Nitrous Control Center Installation and Operating Instructions 121
Nitrous1 and Nitrous2 Maximum (OFF) MPH Setting
This setting dictates the maximum MPH at which either Nitrous1 or Nitrous2 is activated.
The valid range is 0-255 in 1 MPH increments.
Access from the Controller:
From the Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the Hall Input
Menu selection is highlighted, and then press the “ENTER” button twice. Press the "DOWN" arrow button until the
either the Nitrous1 or Nitrous2 maximum MPH selection is highlighted and then press the "ENTER" button. Use
the “LEFT” and ”RIGHT” arrow buttons adjust the setting. Press the “SAVE” button to accept the new setting or
press the “ESC” button to exit with no change.
Access from the Computer Program:
From the Status screen , press either the "Nitrous1" or "Nitrous2" buttons. The "Nitrous OFF MPH" setting is
found in the "Nitrous Control MPH" dialog box under the "Options" Tab. Click the "UP" and "DOWN" arrow
buttons or type in any numeric value in the valid ranges shown above.
Nitrous1 and Nitrous2 MPH Hysteresis Percentage Setting
This setting determines the hysteresis percentage for the activation of both nitrous stages at the minimum and
maximum MPH. Refer to
Appendix D: Glossary of Terms for an explanation of how a hysteresis works.
The valid range is 0.0%-5.0% in 0.1% increments (percentage of full scale, 255 MPH). 1% is 2.55 MPH.
Access from the Controller:
From the Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the Hall Input
Menu selection is highlighted, and then press the “ENTER” button twice. Press the "DOWN" arrow button until the
either the MPH1 or MPH2 hysteresis percentage selection is highlighted and then press the "ENTER" button.