Lingenfelter NCC-001, Installation And Operating Instructions Manual

Page: 98 / 171

Lingenfelter NCC-001 Nitrous Control Center Installation and Operating Instructions 97
Access from the Computer Program:
From the Status screen , press the "Setup" button. The "Activation Percent" setting is found in the "TPS
Activation Percent" dialog box under the "TPS Input" Tab. Click the "UP" and "DOWN" arrow buttons or type in
any numeric value in the valid ranges shown above.
Hysteresis Percentage
This setting determines the TPS Activation Hysteresis Percentage. Refer to Appendix D: Glossary of Terms for
an explanation of how a hysteresis works.
The Valid range is 0.1% to 5.0% in 0.1% increments (of full scale, 100%).
Access from the Controller:
From the Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the TPS
Setup Menu selection is highlighted, and then press the “ENTER” button. Press the down arrow until the
"Hysteresis%" selection is highlighted and then press the "ENTER" button. Use the “LEFT” and ”RIGHT” arrow
buttons adjust the setting. Press the “SAVE” button to accept the new setting or press the “ESC” button to exit
with no change.
Access from the Computer Program:
From the Status screen , press the "Setup" button. The "Activation Hysteresis" setting is found in the "TPS
Activation Percent" dialog box under the "TPS Input" Tab. Click the "UP" and "DOWN" arrow buttons or type in
any numeric value in the valid ranges shown above.