Lingenfelter NCC-001, Installation And Operating Instructions Manual

Page: 142 / 171

Lingenfelter NCC-001 Nitrous Control Center Installation and Operating Instructions 141
Save User Program File
This option allows the user to save a user program file to the computer that was either created in the computer
program or flashed from the controller.
Access from the Computer Program:
There are three (3) ways to save a User Program File, denoted below by the bullet points.
Press Ctrl+S
From the
Status screen , click on the File button in the upper left-hand corner of the window, then click on the
"Save User Program File" button.
From the Status screen , click on the "Save User Program File" button in the toolbar on the upper left-hand side
of the window, as shown below.