Lingenfelter NCC-001, Installation And Operating Instructions Manual

Page: 63 / 171

Global Menu / Setup-Options 62
Access from the Computer Program:
From the Status screen , press the "SETUP" button. The "Main Timer" setting is found in the "Nitrous Timer
Options" dialog box under the "Options" Tab. Click the "UP" and "DOWN" arrow buttons or type in any numeric
value from 20-300.
5.5 Fuel Trim Option
WARNING - This setting controls the Fuel Trim. This setting allows the Fuel Percentage to be set to Less
than the Nitrous percentage. Use this setting with great caution!
This setting controls the total Percentage the Fuel may be set less than the Nitrous percentage. Example—a
setting of 25 would allow the Fuel percent to be 25% less than the Nitrous percentage. A fuel trim setting of 0%
does not allow the fuel to be less than the nitrous in the stage1 or stage2 graphs.
Valid Range is 0% to 100% in 0.1% increments.
Access from the Controller:
From the Main screen , press the “GLOBAL” button. Press the “DOWN” arrow button repeatedly until the "Fuel
Trim Option" menu selection is highlighted and then press the “ENTER” button. Using the “LEFT” and ”RIGHT”
arrow buttons adjust the setting. Press the “SAVE” button to accept the new setting or press the “ESC” button to
exit with no change.
Access from the Computer Program:
From the Status screen , press the "SETUP" button. The "Fuel Trim" setting is found in the "Fuel Solenoid Control
Option" dialog box under the "Options" Tab. Click the "UP" and "DOWN" arrow buttons or type in any numeric
value from 0.0-100.0.