Lingenfelter NCC-001, Installation And Operating Instructions Manual

Page: 10 / 171

Lingenfelter NCC-001 Nitrous Control Center Installation and Operating Instructions 9
1.4 NCC-001 Notes
For the sake of simplicity, options and settings that are accessed through either the Nitrous1 (N2O-1) or
Nitrous2 (N2O-2) menus will by accompanied by an illustration of the setting for Nitrous1 only. Note that the
Nitrous1 and Nitrous2 menus have the exact same options and settings—they just control different nitrous
stages.
Many of the wiring descriptions and diagrams for the NCC-001 in this manual assume you have the optional
NCC-001 wiring harness (PN: L480310000). This harness features wires that are pre-labeled with the NCC-001
terminal labels, as well as ring terminals with heat shrink insulation on one end.
The wiring descriptions and diagrams in this manual that involve connecting the NCC-001 to a fuel or nitrous
pressure sensor assume that you have the optional fuel pressure harness (PN: L480290000) and nitrous
pressure harness (PN:L480300000). These harnesses feature wires that are pre-labeled with the applicable
NCC-001 terminal labels, as well as ring terminals with heat shrink insulation on one end.
The NCC-001 is not designed for use on aircrafts.
Because the Nitrous Control Center computer software and the NCC-001 firmware are not organized in the same
way, settings and options are not necessarily found in the same places on both platforms. The options and
settings described in this instruction manual are organized in the same manner as the NCC-001 controller.