Lingenfelter NCC-001, Installation And Operating Instructions Manual

Page: 113 / 171

Setup Menu 112
From the Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the desired
Relay Menu is highlighted and then press the “ENTER” button. Press the "ENTER" button to select the "Shift
Input Ctrl" option, then the “YES” or “NO” button to change the current selection. If the “NO” button is pressed no
change will be made.
Access from the Computer Program:
From the Status screen , select the relay by pressing either the "Relay1" button or the "Relay2" button. The "Shift
Input Enable" option is located in the "Relay Control Options" dialog box. Check the box to enable the Shift Input
Control Option or un-check the box to disable the option.
Throttle Position Sensor (TPS) Percentage Control Option
If this option is enabled, the selected Relay output is controlled by TPS input and any other control options that
are enabled.
Access from the Controller:
From the Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the desired
Relay Menu is highlighted and then press the “ENTER” button. Press the "ENTER" button to select the "TPS
Percent Ctrl" option, then the “YES” or “NO” button to change the current selection. If the “NO” button is pressed
no change will be made.
Access from the Computer Program:
From the Status screen , select the relay by pressing either the "Relay1" button or the "Relay2" button. The
"Throttle Input Enable" option is located in the "Relay Control Options" dialog box. Check the box to enable the
Throttle Input Percentage Control Option or un-check the box to disable the option.