Lingenfelter NCC-001, Installation And Operating Instructions Manual

Page: 93 / 171

Setup Menu 92
Access from the Computer Program:
From the Status screen , press the "Timer" button. The "Timer Delay" option is found in the "Time Based Setup"
dialog box under the "Options" Tab. Click the "UP" and "DOWN" arrow buttons or type in any numeric value in
the valid ranges shown above.
Timer Duration
This setting controls the amount of time the Timer Out remains "ON" after the delay has expired. A setting of 0
will disable this option and the output will remain "ON" while the system is activated.
The valid range is 0.000-9.990 in .01 second increments.
Access from the Controller:
From the Main screen press the “SETUP” button and then press the “ENTER” button. Press the "DOWN" button
continuously until the "Timer Setup Menu" is selected, then press "ENTER". Press the "DOWN" button
continuously until the "Timer Duration" setting is highlighted, then press "ENTER". Using the “LEFT” and ”RIGHT”
arrow buttons, adjust the setting. Press the “SAVE” button to accept the new setting or press the “ESC” button to
exit with no change.
Access from the Computer Program:
From the Status screen , press the "Timer" button. The "Timer Duration" option is found in the "Time Based
Setup" dialog box under the "Options" Tab. Click the "UP" and "DOWN" arrow buttons or type in any numeric
value in the valid ranges shown above.