Lexmark X950de 4 User Manual Download Page 72

Page: 72 / 372

Loading the standard or optional 520

‑

sheet tray

The printer has one standard 520

‑

sheet tray (Tray 1), and may have one or more optional 520

‑

sheet trays. All 520

‑

sheet

trays support the same paper sizes and types.

CAUTION—POTENTIAL INJURY:

To reduce the risk of equipment instability, load each paper drawer or tray

separately. Keep all other drawers or trays closed until needed.

Pull the tray out.

Notice the size indicators at the bottom of the tray. Use these indicators to help position the length and width
guides.

Loading paper and specialty media

Summary of Contents for X950de 4





















































































































































































































































































































































































Search results

Summary of Contents for X950de 4

Reviews:

Related manuals for X950de 4

Brands by name

Popular brands

Lexmark X950de 4, User Manual

Search results

Summary of Contents for X950de 4

Reviews:

Related manuals for X950de 4

Brands by name

Popular brands