Lexmark X950de 4, User Manual

Page: 62 / 372

In Mac OS X version 10.4 or earlier
1
From the Finder, navigate to:
Applications > Utilities
2
Double
‑
click Printer Setup Utility or Print Center .
3
From the Printer List, click Add .
4
Click Default Browser tab > More Printers .
5
From the first pop
‑
up menu, select AppleTalk .
6
From the second pop
‑
up menu, select Local AppleTalk Zone .
7
Select the printer from the list, and then click Add .
Note: If the printer does not show up in the list, then you may need to add it using the IP address. For more
information, contact your system support person.
Changing port settings after installing a new network Internal
Solutions Port
When a new Lexmark Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers
that access the printer must be updated since the printer will be assigned a new IP address. All computers that access
the printer must be updated with this new IP address.
Notes:
• If the printer has a static IP address, then you do not need to make any changes to the computer configurations.
• If the computers are configured to use network name that will stay the same, instead of by IP address, then you
do not need to make any changes to your computer configurations.
•
If you are adding a wireless ISP to a printer previously configured for a wired connection, then make sure the
wired network is disconnected when you configure the printer to operate wirelessly. If the wired connection
remains connected, then the wireless configuration will complete, but the wireless ISP will not be active. In the
event that the printer was configured for a wireless ISP while still attached to a wired connection, disconnect
the wired connection, turn the printer off, and then turn the printer back on again. This will enable the wireless
ISP.
• Only one network connection at a time is active. If you want to switch the connection type between wired and
wireless, you must first turn the printer off, connect the cable (to switch to a wired connection) or disconnect
the cable (to switch to a wireless connection), and then turn the printer on.
For Windows users
1
Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
•
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
•
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2
Click , or click Start and then click Run .
3
In the Start Search or Run box, type
control printers
.
4
Press Enter , or click OK .
The printer folder opens.
Additional printer setup 62