manualshive.com logo in svg

Lenovo ThinkPad 600, User Manual

The Lenovo ThinkPad 600 is a reliable and powerful laptop designed for seamless productivity. Unlock its full potential with the comprehensive User Manual, available for free download at manualshive.com. This manual offers step-by-step instructions and valuable insights to maximize your experience with this exceptional device.

Share
Download
background image

 

Downloading of diagnostics

LCCM manages the PC and end-user profiles on the server and
provides an easy way to ensure that clusters of IBM PCs have
identical software configurations. Typical environments include help
desk and call centers, educational classrooms, and many
transaction-oriented environments found throughout many
businesses worldwide.

Your computer with the SelectaDock III system supports the following
LAN cards for the LCCM function:

IBM 100/10 EtherJet PCI Adapter with Wake on LAN
IBM Auto Wake Token Ring ISA Adapter

  Note 

For updated LAN cards, see the following Web site:

  http://www.pc.ibm.com/register

You can obtain LCCM with no charge from the following Web site:

  http://www.pc.ibm.com/register

Notes:

1. You must install LCCM in the server computer, not in the client

computer.

2. If you are using the IBM 100/10 EtherJet PCI Adapter with Wake

on LAN card, you must set the Remote Program Load ROM to
use LCCM. For more details, see the manual for your LAN card.

Setting Up System-Management Features

This section describes how to configure the network interface in your
computer. You can change the settings of system-management
features in Easy-Setup. Easy-Setup contains the following functions:

Enabling or disabling Wake on LAN
Automatic power-on startup sequence
Enabling or disabling Flash (POST/BIOS) update from the

network

   

Appendix A. Using System Management

189

Summary of Contents for ThinkPad 600






























































































































































































































Reviews:

No comments

Related manuals for ThinkPad 600

ABB LevelMaster 7100 Application Manual preview
LevelMaster 7100
Brand: ABB Pages: 28
ABB Ability Smart Sensor Installation Manuallines preview
Ability Smart Sensor
Brand: ABB Pages: 4
ABB 4690 Series Operating Instruction preview
4690 Series
Brand: ABB Pages: 20
Jetmaster 700 Installation Instructions Manual preview
700
Brand: Jetmaster Pages: 17
Qube AP1 Supplemental Instructions preview
AP1
Brand: Qube Pages: 19
IBM 77 Reference Manual preview
77
Brand: IBM Pages: 12
GE FUF14SVRWW Instructions Manual preview
FUF14SVRWW
Brand: GE Pages: 20
GE 868 GEN2 Installation Instructions And Owner'S Manual preview
868 GEN2
Brand: GE Pages: 2
NEC VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION Manual preview
VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION
Brand: NEC Pages: 4
Samsung MWR-WW10N User Manual preview
MWR-WW10N
Brand: Samsung Pages: 60
IBM ThinkPad i Series Setup Manual preview
ThinkPad i Series
Brand: IBM Pages: 5
IBM Thinkpad X30 Series User Manual preview
Thinkpad X30 Series
Brand: IBM Pages: 22
ibis Ripley Frame Tuning Manual preview
Ripley
Brand: ibis Pages: 12
IAME Parilla X30 Assembly Instructions And User'S Manual preview
Parilla X30
Brand: IAME Pages: 17
IBM ThinkPad 600X? Quick Reference preview
ThinkPad 600X?
Brand: IBM Pages: 2
IBM THINKPAD R50 series Service And Troubleshooting Manual preview
THINKPAD R50 series
Brand: IBM Pages: 108
IBM ThinkPad i Series 1400 Supplementary Manual preview
ThinkPad i Series 1400
Brand: IBM Pages: 46
IBM ThinkPad 570 User Reference Supplement preview
ThinkPad 570
Brand: IBM Pages: 3

Brands by name

Popular brands

Load more brands