manualshive.com logo in svg

Lenovo ThinkAgile VX 4-Socket 4U Certified Node, User Manual

The Lenovo ThinkAgile VX 4-Socket 4U Certified Node is a powerful and reliable solution for data-intensive workloads. Unlock the full potential of this product with our comprehensive User Manual, available for free download from our website. Get all the necessary details and instructions to maximize your experience with this incredible device.

Share
Download
background image

remove all electrical current from the device, ensure that all power cords are disconnected from the 
power source.

“

” on page 89 “

” on page 65

CAUTION: 
Make sure that all server power cords are disconnected from their power sources before performing 
this procedure.

Before you install the compute tray:

1.  Make sure that all cables, adapters, and other components are installed and seated correctly and that 

you have not left loose tools or parts inside the server. 

2.  Make sure that all internal cables are correctly routed. See “Internal cable routing” on page 40.

Complete the following steps to install the compute tray when it is fully removed from the chassis:

Watch the procedure

. A video of the replacement process is available: 

• 

YouTube

• 

Youku

Figure 61. Compute tray installation (fully removed)

Important:

Compute trays must be inserted in the chassis with the processors and memory visible from the 

top.
Step 1.  Align the compute tray with its opening in the front of the chassis and insert.
Step 2.  Fully open the compute tray release levers and push the compute tray into the chassis until it stops.
Step 3.  Rotate the compute tray release levers until they lock, fully closed.

If you are done performing installation or maintenance procedures at the front of the chassis, install the front 
cover. See “Install the front cover” on page 132.

118

User Guide for ThinkAgile VX7820 Appliance, ThinkAgile VX 4-Socket 4U Certified Node 

Summary of Contents for ThinkAgile VX 4-Socket 4U Certified Node









































































































































































































































































































Reviews:

No comments

Related manuals for ThinkAgile VX 4-Socket 4U Certified Node

Xerox CX Visual Reference Manual preview
CX
Brand: Xerox Pages: 12
H3C UniServer R4900 G5 Operating System Installation Manual preview
UniServer R4900 G5
Brand: H3C Pages: 141
Kontron CG2100 Installation And Maintenance Manual preview
CG2100
Brand: Kontron Pages: 110
IBM System x3650 M5 Installation And Service Manual preview
System x3650 M5
Brand: IBM Pages: 1010
IBM 9405-520 Quick Start Manual preview
9405-520
Brand: IBM Pages: 16
Planet FPS-1PW User Manual preview
FPS-1PW
Brand: Planet Pages: 87
Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT Reference Manual preview
NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT
Brand: Red Hat Pages: 318
Multitech MultiAccess MULTIACCESS MA30120 User Manual preview
MultiAccess MULTIACCESS MA30120
Brand: Multitech Pages: 179
Supermicro SuperStorageSystem SSG-2028R-DN2R24L User Manual preview
SuperStorageSystem SSG-2028R-DN2R24L
Brand: Supermicro Pages: 82
Supermicro TwinPro 1029TP-DC0R User Manual preview
TwinPro 1029TP-DC0R
Brand: Supermicro Pages: 136
B+B SmartWorx UE204 User Manual preview
UE204
Brand: B+B SmartWorx Pages: 24
Micron NetFrame 5200 Series Product Manual preview
NetFrame 5200 Series
Brand: Micron Pages: 17
Digitus DN-7025 Quick Installation Manual preview
DN-7025
Brand: Digitus Pages: 8
Intel S1200SPL Technical Spesification preview
S1200SPL
Brand: Intel Pages: 147
Lantronix XPress-DR Plus Quick Start Manual preview
XPress-DR Plus
Brand: Lantronix Pages: 8
Acnodes RMC 7189 User Manual preview
RMC 7189
Brand: Acnodes Pages: 98
Lantronix EDS3000PR Quick Start Manual preview
EDS3000PR
Brand: Lantronix Pages: 2
Thales SafeNet ProtectServer Network HSM 5.9 Installation And Configuration Manual preview
SafeNet ProtectServer Network HSM 5.9
Brand: Thales Pages: 37

Brands by name

Popular brands

Load more brands