Lenovo ThinkAgile VX 4-Socket 4U Certified Node User Manual Download Page 32 | Manualshive

Page: 32 / 296

background image

Lenovo XClarity Essentials OneCLI is a collection of command line applications that can be used to
manage Lenovo servers. Its update application can be used to update firmware and device drivers for
your servers. The update can be performed within the host operating system of the server (in-band) or
remotely through the BMC of the server (out-of-band).

Specific details about updating firmware using Lenovo XClarity Essentials OneCLI is available at:

http://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_c_update.html

You can obtain Lenovo XClarity Essentials UpdateXpress from the following location:

https://datacentersupport.lenovo.com/solutions/lnvo-xpress

•

Lenovo XClarity Essentials Bootable Media Creator

You can use Lenovo XClarity Essentials Bootable Media Creator to create bootable media that is suitable
for applying firmware updates, running preboot diagnostics, and deploying Microsoft Windows operating
systems.

You can obtain Lenovo XClarity Essentials BoMC from the following location:

https://datacentersupport.lenovo.com/solutions/lnvo-bomc

•

Lenovo XClarity Administrator

If you are managing multiple servers using the Lenovo XClarity Administrator, you can update firmware for
all managed servers through that interface. Firmware management is simplified by assigning firmware-
compliance policies to managed endpoints. When you create and assign a compliance policy to managed
endpoints, Lenovo XClarity Administrator monitors changes to the inventory for those endpoints and flags
any endpoints that are out of compliance.

Specific details about updating firmware using Lenovo XClarity Administrator are available at:

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/update_fw.html

Tech Tips

Lenovo continually updates the support website with the latest tips and techniques that you can use to solve

issues that you might have with your server. These Tech Tips (also called retain tips or service bulletins)

provide procedures to work around issues related to the operation of your server.

To find the Tech Tips available for your server:

1. Go to

http://datacentersupport.lenovo.com

and navigate to the support page for your server.

2. Click

Documentation

from the navigation pane.

Follow the on-screen instructions to choose the category for the problem that you are having.

Security advisories

Lenovo is committed to developing products and services that adhere to the highest security standards in

order to protect our customers and their data. When potential vulnerabilities are reported, it is the

responsibility of the Lenovo Product Security Incident Response Team (PSIRT) to investigate and provide

information to our customers so they may put mitigation plans in place as we work toward providing

solutions.

The list of current advisories is available at the following site:

https://datacentersupport.lenovo.com/product_security/home

22

User Guide for ThinkAgile VX7820 Appliance, ThinkAgile VX 4-Socket 4U Certified Node

«
...
30
31
32
33
34
...
»

Summary of Contents for ThinkAgile VX 4-Socket 4U Certified Node









































































































































































































































































































Reviews:

No comments

Related manuals for ThinkAgile VX 4-Socket 4U Certified Node

Brand: PaloAlto Networks Pages: 30

Brand: NEC Pages: 151

NSLU2 - Network Storage Link NAS Server

Brand: Linksys Pages: 64

Brand: IBM Pages: 220

Brand: RackSolutions Pages: 8

Brand: FS Pages: 91

Brand: MRV Communications Pages: 65

PRIMERGY RX200 S6

Brand: Fujitsu Pages: 84

Brand: Kramer Pages: 2

Brand: IBM Pages: 5

Brand: Axis Pages: 172

Brand: Measy Pages: 15

Brand: Supermicro Pages: 72

Brand: Supermicro Pages: 78

Brand: GIGA-BYTE TECHNOLOGY Pages: 113

Brand: Lantronix Pages: 80

FieldServer FS-8700-10

Brand: SMC Networks Pages: 10

Brand: Inspur Pages: 63

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands