manualshive.com logo in svg

Lenovo ThinkAgile VX 4-Socket 4U Certified Node, User Manual

The Lenovo ThinkAgile VX 4-Socket 4U Certified Node is a powerful and reliable solution for data-intensive workloads. Unlock the full potential of this product with our comprehensive User Manual, available for free download from our website. Get all the necessary details and instructions to maximize your experience with this incredible device.

Share
Download
background image

Step 2.  Align the adapter with the riser slot and insert it; then, press the adapter into the riser until the 

connector is fully seated.

Step 3.  Close and lock the retention latch. 

If you have no other operations to perform on the riser after installing an adapter in slot 1 to 4: 

1.  If any of the adapters in the riser have internal cables, make sure that they are connected before 

installing the riser in the I/O tray.

2.  Install the riser in the I/O tray. See “Install the riser for slot 1 to 4 (riser 1)” on page 218.
3.  Install the I/O tray in the chassis and connect all cables. See “Install the I/O tray” on page 154.

Install a PCIe adapter in slot 5 to 8

PCIe adapters in slot 5 to 8 are in the I/O tray that is accessed from the rear of the server. With the I/O tray 

removed from the chassis, insert the adapter in the I/O tray.

Note:

You should not install a RAID or Host Bus Adapter card in slot 7.

S002 

CAUTION: 
The power-control button on the device and the power switch on the power supply do not turn off the 
electrical current supplied to the device. The device also might have more than one power cord. To 
remove all electrical current from the device, ensure that all power cords are disconnected from the 
power source.

“

” on page 89 “

” on page 65

CAUTION: 
Make sure that all server power cords are disconnected from their power sources before performing 
this procedure.

Before you Install a PCIe adapter in slot 5 to 8, make sure that there is no filler installed in the slot where you 
are installing the adapter.

Important:

You must remove the riser from the I/O tray before installing an adapter.

Complete the following steps to install an adapter for slot 5 to 8.

Watch the procedure

. A video of the installation process is available: 

• 

YouTube

• 

Youku

100

User Guide for ThinkAgile VX7820 Appliance, ThinkAgile VX 4-Socket 4U Certified Node 

Summary of Contents for ThinkAgile VX 4-Socket 4U Certified Node









































































































































































































































































































Reviews:

No comments

Related manuals for ThinkAgile VX 4-Socket 4U Certified Node

Sun Oracle Sun Blade T6340 Installation And Administration Manual preview
Sun Blade T6340
Brand: Sun Oracle Pages: 82
B.E.G. LUXOMAT net ViSTATION Quick Start Manual preview
LUXOMAT net ViSTATION
Brand: B.E.G. Pages: 4
LaCie 301297U - 1TB Ethernet Disk XP Embedded Network Attached... Online Manual preview
301297U - 1TB Ethernet Disk XP Embedded Network Attached...
Brand: LaCie Pages: 67
IBM ProtecTIER DD6 Instructions Manual preview
ProtecTIER DD6
Brand: IBM Pages: 10
Axis 27978R1 User Manual preview
27978R1
Brand: Axis Pages: 66
Supero SUPERSERVER 6028TP-HTFR User Manual preview
SUPERSERVER 6028TP-HTFR
Brand: Supero Pages: 141
Sun Microsystems Netra T2000 Service Manual preview
Netra T2000
Brand: Sun Microsystems Pages: 138
LevelOne FPS-2013TXU User Manual preview
FPS-2013TXU
Brand: LevelOne Pages: 88
Airlink101 AMPS240W User Manual preview
AMPS240W
Brand: Airlink101 Pages: 36
IBM @server xSeries 343 Product Manual preview
@server xSeries 343
Brand: IBM Pages: 193
IBM 8668 - Eserver xSeries 232 Hardware Maintenance Manual preview
8668 - Eserver xSeries 232
Brand: IBM Pages: 182
Raritan DOMINION KSX II User Manual preview
DOMINION KSX II
Brand: Raritan Pages: 362
CryptoTelecom S-160 User Manual preview
S-160
Brand: CryptoTelecom Pages: 86
Excito BUBBA User Manual preview
BUBBA
Brand: Excito Pages: 46
Axis OfficeBasic USB Wireless G User Manual preview
OfficeBasic USB Wireless G
Brand: Axis Pages: 43
Multitech ProxyServer MTPSR3-100 User Manual preview
ProxyServer MTPSR3-100
Brand: Multitech Pages: 79
Meinberg LANTIME M300 Technical Reference preview
LANTIME M300
Brand: Meinberg Pages: 41
Corvus systems Mirror Server Manager'S Manual preview
Mirror Server
Brand: Corvus systems Pages: 108

Brands by name

Popular brands

Load more brands