manualshive.com logo in svg

Lenovo ThinkAgile VX 4-Socket 4U Certified Node, User Manual

The Lenovo ThinkAgile VX 4-Socket 4U Certified Node is a powerful and reliable solution for data-intensive workloads. Unlock the full potential of this product with our comprehensive User Manual, available for free download from our website. Get all the necessary details and instructions to maximize your experience with this incredible device.

Share
Download
background image

Before you remove an adapter from slot 1 to 4:

1.  Disconnect and label all cables connected to adapters in the I/O tray; then, remove the I/O tray. See 

“Remove the I/O tray” on page 152.

2.  Remove the riser for slot 1 to 4 (riser 1). See “Remove the riser for slot 1 to 4 (riser 1)” on page 212.

Complete the following steps to remove an adapter from slot 1 to 4.

Watch the procedure

. A video of the installation process is available: 

• 

YouTube

• 

Youku

Figure 43. Adapter removal (slot 1 to 4)

Step 1.  Open the retention latch. 
Step 2.  Disengage the adapter from its connector on the riser and lift the adapter from the riser.

After you remove the adapter:

•  If you are removing the adapter and are not installing a replacement:

1.  Install a filler in the empty adapter slot and close the retention latch.
2.  Install the riser. See “Install the riser for slot 1 to 4 (riser 1)” on page 218.
3.  Install the I/O tray and connect all cables. See “Install the I/O tray” on page 154.

If you are instructed to return the adapter, follow all packaging instructions, and use any packaging materials 
for shipping that are supplied to you.

Remove a PCIe adapter from slot 5 to 8

PCIe adapters in slot 5 to 8 are in the I/O tray that is accessed from the rear of the server. After removing the 

I/O tray from the chassis, remove the adapter from the I/O tray.

S002 

CAUTION: 
The power-control button on the device and the power switch on the power supply do not turn off the 
electrical current supplied to the device. The device also might have more than one power cord. To 
remove all electrical current from the device, ensure that all power cords are disconnected from the 
power source.

Chapter 9

.

Hardware replacement procedures

93

Summary of Contents for ThinkAgile VX 4-Socket 4U Certified Node









































































































































































































































































































Reviews:

No comments

Related manuals for ThinkAgile VX 4-Socket 4U Certified Node

Canon ColorPASS-Z5000 Getting Started preview
ColorPASS-Z5000
Brand: Canon Pages: 130
TANDBERG VCS Administration Manual preview
VCS
Brand: TANDBERG Pages: 187
IBM 6219 - IntelliStation M - Pro Configuration And Options Manual preview
6219 - IntelliStation M - Pro
Brand: IBM Pages: 317
Zenith z-server lt User Manual preview
z-server lt
Brand: Zenith Pages: 218
Moxa Technologies NPort IA5250I/5250I-T Series Quick Installation Manual preview
NPort IA5250I/5250I-T Series
Brand: Moxa Technologies Pages: 2
NMS Communications Vision VS 5000 Installing preview
Vision VS 5000
Brand: NMS Communications Pages: 22
EMC SVR-I2U-R2312 Installation And Maintenance Manual preview
SVR-I2U-R2312
Brand: EMC Pages: 34
ADLINK Technology DLAP-201 Series User Manual preview
DLAP-201 Series
Brand: ADLINK Technology Pages: 39
Supermicro SuperServer E300-9A-4C User Manual preview
SuperServer E300-9A-4C
Brand: Supermicro Pages: 109
Autonomic Mirage MMS-1e Setup Manual preview
Mirage MMS-1e
Brand: Autonomic Pages: 17
IBM xSeries 200VL Installation Manual preview
xSeries 200VL
Brand: IBM Pages: 70
Raritan Dominion SX II User Manual preview
Dominion SX II
Brand: Raritan Pages: 99
AIC HA201-AP User Manual preview
HA201-AP
Brand: AIC Pages: 64
IOGear GPSU21 Installation Manual preview
GPSU21
Brand: IOGear Pages: 48
NEC Express 320Ma Read Me First preview
Express 320Ma
Brand: NEC Pages: 10
EDSLab WiDRIVE User Manual preview
WiDRIVE
Brand: EDSLab Pages: 24
CNET CNP-101U Hardware User'S Manual preview
CNP-101U
Brand: CNET Pages: 14
TRENDnet TEW-PS3 Specifications preview
TEW-PS3
Brand: TRENDnet Pages: 2

Brands by name

Popular brands

Load more brands