manualshive.com logo in svg

Lenovo ThinkAgile VX 4-Socket 4U Certified Node, User Manual

The Lenovo ThinkAgile VX 4-Socket 4U Certified Node is a powerful and reliable solution for data-intensive workloads. Unlock the full potential of this product with our comprehensive User Manual, available for free download from our website. Get all the necessary details and instructions to maximize your experience with this incredible device.

Share
Download
background image

Chapter 8. Installing and setting up Lenovo XClarity Integrator

Lenovo XClarity Integrator for VMware vCenter is an extension to VMware vCenter and provides system 

administrators with enhanced management capabilities for ThinkAgile VX7820 Appliance/VX 4U Certified 

Node. Lenovo XClarity Integrator for VMware vCenter expands the management capabilities of VMware 

vCenter by integrating Lenovo hardware management functionality. 

Lenovo XClarity Integrator is used to perform the following functions for the ThinkAgile VX7820 Appliance/VX 
4U Certified Node cluster: 

•  Deployment
•  Certificates
•  Navigating in your browser :9443
•  Requesting BMC and Host access
•  Configuration Patterns
•  Compliance Policy
•  Rolling System Reboot
•  Rolling System Update
•  Viewing inventory
•  KVM

For more information about Lenovo XClarity Integrator, see the following website:

https://www3.lenovo.com/us/en/data-center/software/systems-management/xclarity-integrators/

Deploying Lenovo XClarity Integrator for VMware vCenter 

Use this procedure to install Lenovo XClarity Integrator for VMware vCenter

Complete the following steps to deploy Lenovo XClarity Integrator.
Step 1.  Download the Lenovo XClarity Integrator image. 

The currently supported version of Lenovo XClarity Integrator is available at the following website:

https://datacentersupport.lenovo.com/us/en/solutions/ht505302

Step 2.  Install Lenovo XClarity Integrator.  

Information about installing Lenovo XClarity Integrator is available at:

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxci_vcenter.doc/vcenter_install_esxi.html

Important:

When configuring network access during the initial setup, use the following 

instructions:

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxci_vcenter.doc/vcenter_admin_ 

confignetworkaccess.html

After you configure network access, Lenovo XClarity Integrator will restart and you will need to use 
the new IP address to access Lenovo XClarity Integrator.

Step 3.  Configure Lenovo XClarity Integrator and Lenovo XClarity Administrator. 

© Copyright Lenovo 2020

87

Summary of Contents for ThinkAgile VX 4-Socket 4U Certified Node









































































































































































































































































































Reviews:

No comments

Related manuals for ThinkAgile VX 4-Socket 4U Certified Node

Samsung SRD-1670DC Properties preview
SRD-1670DC
Brand: Samsung Pages: 7
360 Systems V2000 Series Operation Manual preview
V2000 Series
Brand: 360 Systems Pages: 117
Korenix AnyBus-X Installation Leaflet preview
AnyBus-X
Brand: Korenix Pages: 2
Supero 6027R-E1R12N User Manual preview
6027R-E1R12N
Brand: Supero Pages: 112
IBM DB2 9 Planning Manual preview
DB2 9
Brand: IBM Pages: 51
NMS Communications Vision VS 5000 Installing preview
Vision VS 5000
Brand: NMS Communications Pages: 22
Buffalo TeraStation WSS WS5020N6 User Manual preview
TeraStation WSS WS5020N6
Brand: Buffalo Pages: 115
AC&T System ETOS-100XP-E04 User Manual preview
ETOS-100XP-E04
Brand: AC&T System Pages: 32
Synology CS-406 Quick Installation Manual preview
CS-406
Brand: Synology Pages: 16
Synology NAS FS3400 Hardware Installation Manual preview
NAS FS3400
Brand: Synology Pages: 33
Synology RX1211 User Manual preview
RX1211
Brand: Synology Pages: 20
Synology DS713+ Quick Installation Manual preview
DS713+
Brand: Synology Pages: 21
Synology DiskStation DS411 Quick Installation Manual preview
DiskStation DS411
Brand: Synology Pages: 22
Viavi G4-ObserverONE Manual preview
G4-ObserverONE
Brand: Viavi Pages: 11
Kathrein EXIP 414 Manual preview
EXIP 414
Brand: Kathrein Pages: 20
Meinberg LANTIME M100 Constructions And Installations Instructions preview
LANTIME M100
Brand: Meinberg Pages: 4
Supermicro H8DC8 User Manual preview
H8DC8
Brand: Supermicro Pages: 78
W&T 57630 Manual preview
57630
Brand: W&T Pages: 211

Brands by name

Popular brands

Load more brands