IC-Module for EtherNet/IP
8 / 137
2.3 General Safety Guidelines
DANGER
Danger of electric shock
If unsuitable power supply is used, this can cause an electric shock.
Ø
This can cause death, serious injuries and material damage to your
systems and modules.
è
Only use a power supply that complies with the regulations for safety
extra-low voltage (SELV) or protective extra-low voltage (PELV).
CAUTION
Fault due to mechanical load
A continuous mechanical load of over 5 G or shock loads of over 15 G can
cause faults on your modules.
è
Comply with these load limits and avoid any unnecessary loads.
CAUTION
Damage due to subsequent processing
Avoid subsequent processing of the KUNBUS-IC.
Ø
Soldering can cause components to become detached and thus
damage or destroy the module.
Ø
Please note that the warranty shall become invalid if the products are
changed technically.
è
Speak to your contact person at the KUNBUS GmbH about customised
solutions.
2.4 Environmental Conditions
Operate the KUNBUS-IC only in an environment that complies with
the operating conditions in order to prevent any damage.
Suitable Environmental Conditions:
Operating temperature
0 °C to +60 °C
Humidity
0% not 95%, non-condensing
Safety Guidelines
