IC-Module for EtherNet/IP
133 / 137
Displaying process data
The transmitted data can be displayed cyclically for the interfaces
available in the selected mode.
Click on the "Show" button to view the process data of the required
input and output area. The following example shows the process
data of the fieldbus.
NOTICE! The "DPR" button is not active for KUNBUS-IC.
Firmware Update
◦ Request the .kfu file for the update from our support.
◦ Load the file via the FTP server into the "Root" folder of the module".
The file must be transmitted as a binary file.
◦ Restart the module
◦ Check whether the update was successful. If the update was
successful, the website displays a new version number and the .kfu file
was deleted.
◦ If the update was not successful, please contact our support (The .kfu
file should also have been removed from the module in this case).
NOTICE
After an update, the module takes slightly longer to restart.
Do not disconnect the power supply. This could cause the module to
become permanently inoperable.
è
Wait for the required time to elapse.
ð
The restart is completed when e.g. the CDI main menu is displayed
again or when the Link/Status LED(s) light(s) up again permanently.
Integrated Server
