IC-Module for EtherNet/IP
22 / 137
Configuration menu
◦ In the main menu enter [2]+[Return].
ð
You will be taken to the configuration menu "Interface Configuration"
In this menu you have the option to set the mapping for the data
broker and the operational parameters for the different interfaces.
– Select "Fieldbus Output Mapping" to define the data source for the
fieldbus output register.
To do this, enter [6] + [Return].
--------------------------------------------------
KUNBUS-
IC
– Interface Configuration
--------------------------------------------------
1 - SDI Communication
2 - CDI Communication
3 - SSC Communication
4 - SDI Output mapping
5 - SSC Output mapping
6 - Fieldbus Output mapping
7 - Fieldbus Specific
8 - Set Arbitrary Register
9 - Reset Module
10 - Extended Databroker
11 - Script Interpreter
12 - Reset to Factory Settings
--------------------------------------------------
>
◦ Enter [1] + [Return].
◦ Specify the first 3 registers of the SDI input register as data source
(start address 0x1401).
To do this, enter [[Return], and then enter[3] +[Return].
◦ Confirm your entry with [Return]
ð
After confirming, you will return automatically to the "Fieldbus Output
Mapping" menu
You can find an overview of the start addresses in the section
"Overview of the Memory Register [
}
53]".
--------------------------------------------------
KUNBUS-
IC
– Edit one map entry
--------------------------------------------------
Source Register: 0x1401
Number of Registers: 3
◦ Create another mapping at the next free position
◦ Select the first 5 registers of the SSC input register as data source (start
address 0x1001)
To do this, enter [[Return], and then enter [5] +[Return].
--------------------------------------------------
KUNBUS-
IC
– Edit one map entry
--------------------------------------------------
Source Register: 0x1001
Number of Registers: 5
Components
