IC-Module for EtherNet/IP
70 / 137
0x001c Configure number of
SSC Outputs
Prerequisite:
You have activated the Master Mode
In this memory register you have the option, to set the number of
output shift register modules for the cyclical data exchange. The size
of each shift register module is 8 bits.
When you carry out a manual configuration here, you must make
sure that the automatic register detection is not set, since these
values are given priority. If the number of connected shift register
modules does not match this register, the SSC interface switches to
error state.
NOTICE
Please note that the total sum of the values from registers 0x001c and
0x001e may not exceed 32.
Modbus Register
0x001c
Value Range
0-32
Default Value
0
Number of bytes avail-
able
1
Permanently stored
Yes
Access
Read/Write
Meaning
0x00
0 Shift registers
0x01
1 Shift registers
0x02 – 0x1F
…..
0x20
32 Shift registers
0x001d Current number of
output shift register modules
Prerequisite:
You have activated the Master Mode.
In this memory register you will find information about the current
number of output shift register modules for the cyclical data
exchange on the SSC interface.
Modbus Register
0x001d
Value Range
0-32
Number of bytes avail-
able
1
Permanently stored
No
Access
Read Only
Meaning
0x00
0 Shift registers
0x01
1 Shift registers
0x02 – 0x0F
…
0x20
32 Shift registers
Memory Register
