IC-Module for EtherNet/IP
112 / 137
2. IP Address: Through the assignment of a unique IP address your
module can be identified in the network and take part in communication.
Make sure that this address is only used once in the network.
¬
3. Network mask. Assign the network mask that the module can use to
find other network subscribers in the network.
¬
4. Enter the IP address of the gateway in your network.
¬
2.8 Set Arbitrary Register
In this menu you have the option,to make adjustments to the
writeable registers that do not have their own menu item.
First enter the register number:
--------------------------------------------------
KUNBUS-
IC
– Set Arbitray Register
--------------------------------------------------
Register Number:
If the register number does not exist or is write-protected, you will
receive a corresponding error message.
--------------------------------------------------
KUNBUS-
IC
– Set Arbitray Register
--------------------------------------------------
Register Number: 0x5001 <<Register doesn‘t exist or no write access
.Register Number:
If the register number is valid, the dialog first shows you the set value
in decimal, hexadecimal and binary notation.
--------------------------------------------------
KUNBUS-
IC
– Set Arbitray Register
--------------------------------------------------
Register Number: 0x0013
Current Value : 1 0x0001 0000_0000_0000_0001b
Enter New Value:
CDI
