IC-Module for EtherNet/IP
120 / 137
Menu 3 – "Monitor Communication"
3 Monitor Communication
In this menu you have the option to view the current values of the
Memory Register.
--------------------------------------------------
KUNBUS-
IC
– Modbus Register Monitor
--------------------------------------------------
1 – SSC In
2 – SDI In
3 - Fieldbus In (from Master)
4 – SSC Out
5 – SDI Out
6 - Fieldbus Out (to Master)
7 - Arbitrary Register
--------------------------------------------------
>
3.1 Monitor SSC Input
Registers
In this menu you will get an overview of the current values of the
input areas of the shift register chain.
In the first row you see the setting values for the display. Here, you
can select a binary [b], hexadecimal [h] or decimal [d] format.
Press[n] to display the next page with further registers.
Press[p] to return to the previous page.
For register addresses that are not implemented, points are
displayed.
--------------------------------------------------
KUNBUS-
IC
– Monitor SSC Input Registers
--------------------------------------------------
b=binary, h=hex, d=decimal, n=next, p=previous <cr>=refresh
0x1001: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x1009: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x1011: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x1019: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x1021: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x1029: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x1031: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x1039: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
>
CDI
