IC-Module for EtherNet/IP
43 / 137
5 Commissioning
5.1 Installation
The main board is connected to the device controller via a 32-pin
connector strip. Thus, you have the option to plug the module directly
into your DIL socket.
NOTICE
If the module is plugged in and unplugged frequently, mechanical
stresses may damage the module.
Use a zero insertion force socket to prevent damage.
Pin assignment on the
application interface
Illustration 7:
Start point view
When you view your module from above, you will find a printed
triangle in one corner.
The counting of the pins starts with the underlying pin which is then
continued U-shaped and ends with the allocation 32 at the opposite
pin.
Illustration 8:
Pin Assignment
Commissioning
