Kunbus LP0016R02, User Manual

Page: 67 / 137

IC-Module for EtherNet/IP
67 / 137
0x0016 Configure SSC mode
In this memory register you have the option, to set the SSC mode of
the module
You can operate the module in slave mode or master mode.
Modbus Register 0x0016
Value Range 0x0000-0x0003
Default Value 0x01
Number of bytes available 1
Permanently stored Yes
Access Read/Write
Meaning
0x00 SSC SSR Master Mode deactivated
0x01 SSC SSR Master Mode (shift register,
automatic detection)
0x02 SSC SSR Mode (slide register,
manual configuration)
0x03 SSC SPI Slave Mode
0x0017 Current SSC Mode
In this memory register you will find information on the current SPI/
SSC mode of the module.
You can find further information on this topic in section"SPI -
Synchronous serial interface [
}
28]".
Modbus Register 0x0017
Value Range 0x0000-0x0004
Initial value 0x01
Number of bytes avail-
able 1
Permanently stored No
Access Read Only
Meaning
0x00 SSC SSR Master Mode deactivated
0x01 SSC SSR Master Mode (shift register,
automatic detection)
0x02 SSC SSR Mode (shift register,
manual configuration)
0x03 SSC SPI Slave Mode
0x04 SSC SSR Master Mode Error Status
Memory Register