IC-Module for EtherNet/IP
98 / 137
Menu 2 – "Interface Configuration"
2. Interface Configuration
In this menu you have the option to define the operational
parameters for the different interfaces.
Here, you can set the mapping for the data broker.
Changes that you make in these menus are first activated after a
restart.
To restart the system, select the menu item "[9 ] Reset Module".
The selection
"8 – Set Arbitrary Register"
allows you write
access to all writeable Modbus registers of the module.
--------------------------------------------------
KUNBUS-
IC
– Interface Configuration
--------------------------------------------------
1 - SDI Communication
2 - CDI Communication
3 - SSC Communication
4 - SDI Output mapping
5 - SSC Output mapping
6 - Fieldbus Output mapping
7 - Fieldbus Specific
8 - Set Arbitrary Register
9 - Reset Module
10 - Extended Databroker
11 - Script Interpreter
12 - Reset to Factory Settings
--------------------------------------------------
2.1 SDI Communication
In this menu you will find information about the settings for the
Modbus RTU communication. You can configure the values in the
submenus.
--------------------------------------------------
KUNBUS-
IC
- SDI Communication
--------------------------------------------------
1 – Bitrate: Automatic Bitrate detection
2 – Parity: Even Parity, 1 Stopbit
--------------------------------------------------
>
CDI
