background image

2.3.1.5.6 Accesses 

 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Configuration Description 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Delete 

Check to delete the entry. It will be deleted during the next save.   

Group Name 

A string identifying the group name that this entry should belong to. The allowed 

string length is 1 to 32, and the allowed content is the ASCII characters from 33 to 

126.  

Security Model 

Indicates the security model that this entry should belong to. Possible security models are:   

any:

 Accepted any security model (v1|v2c|usm).   

v1:

 Reserved for SNMPv1.   

v2c:

 Reserved for SNMPv2c.   

usm:

 User-based Security Model (USM).   

Security Level 

Indicates the security model that this entry should belong to. Possible security models are:   

NoAuth, NoPriv:

 None authentication and none privacy.   

Auth, NoPriv:

 Authentication and none privacy.   

Auth, Priv:

 Authentication and privacy.   

Read View Name 

The name of the MIB view defining the MIB objects for which this request may 

request the current values. The allowed string length is 1 to 32, and the allowed 

content is the ASCII characters from 33 to 126.   

Write View Name 

The name of the MIB view defining the MIB objects for which this request may 

potentially SET new values. The allowed string length is 1 to 32, and the allowed 

content is the ASCII characters from 33 to 126. 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

  Add new access   

Click to add a new SNMPv3 view entry as shown below. 

 

  Delete   

Click to cancel the new entry. 

  Save   

Click to save the changes. 

  Reset   

Click to undo any changes made locally and revert to previously saved values. 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

-28- 

Summary of Contents for KGS-2421




















































































































































Reviews: