Refresh
Click to refresh the page; any changes made locally will be undone.
Clear
Click to clear all counters.
3.7 LLDP
3.7.1 Neighbors
Status Description
Local Port
The port on which the
LLDP
frame was received.
Chassis ID
The Chassis ID is the identification of the neighbor's LLDP frames.
Remote Port ID
The Remote Port ID is the identification of the neighbor port.
System Name
System Name is the name advertised by the neighbor unit.
Port Description
Port Description is the port description advertised by the neighbor unit.
System Capabilities
System Capabilities describes the neighbor unit's capabilities. The possible
capabilities are:
1.
Other
2.
Repeater
3.
Bridge
4.
WLAN
Access
Point
5.
Router
6.
Telephone
7. DOCSIS cable device
8. Station only
9.
Reserved
When a capability is enabled, the capability is followed by (+). If the capability is
disabled, the capability is followed by (-).
Management Address Management Address is the neighbor unit's address that is used for higher layer
entities to assist the discovery by the network management. This could for instance
hold the neighbor's IP address.
Auto-refresh
Check this box to enable an automatic refresh of the page at regular intervals.
-114-
Summary of Contents for KGS-2421
